Download  Print this page

Configure Cucm For Expressway - Cisco BE6000 Design Manual

Collaboration edge
Hide thumbs

Advertisement

Pre-deployment Checklist and Tasks
Contents

Configure CUCM for Expressway

Configure region for video
1.
Configure device pool in CUCM for video and add the video region
2.
Select the above device pool for all video endpoints
3.
For the installation and basic configuration of Cisco Unified Communications Manager (CUCM), please
refer the Unified Communications Using BE6000 Technology Design Guide.
This process lists the prerequisite configuration on the CUCM before you can start configuring either,
mobile and remote access or business-to-business communications.
Procedure 1
Configure region for video
First, you log in to Cisco Unified Communications Manager Administration page and create a separate
region for video traffic to allow more bandwidth for intra or inter region calls.
Step 1.
Navigate to System > Region Information > Region and click Add New.
Step 2.
Enter the following:
Name—Video_Reg
Step 3.
Click Save.
Step 4.
Under Regions, select REG_HQ1.
Deploy MRA and B2B Collaboration
Deployment Details
Deploy CUBE
PAGE 27

Advertisement

Table of Contents
loading

  Also See for Cisco BE6000

  Related Content for Cisco BE6000