Cisco BE6000 Design Manual page 43

Pre-deployment Checklist and Tasks
Contents
Accept presence

Accept out-of-dialog

Accept unsolicited

Accept replaces

Step 3. Click Save.
Procedure 2 Configure SIP trunk on CUCM to Cisco Expressway-C
Step 1. Navigate to Device > Trunk and click Add New.
Step 2. Enter the following:
Trunk Type—SIP Trunk

Device Protocol—SIP

Trunk Service

Deploy MRA and B2B Collaboration
subscription—Selected
refer—Selected
notification—Selected
header—Selected
Type—None (Default)
Deployment Details
Deploy CUBE
PAGE 43