Deploy Mobile And Remote Access - Cisco BE6000 Design Manual

Pre-deployment Checklist and Tasks
Contents

Deploy Mobile and Remote Access

Configure Expressway-C for Mobile and Remote Access
1.
Discover Unified CM and IM&P server on Expressway-C
2.
Configure Expressway-E for Unified CM
3.
Configure server certificates and CA certificates on the Expressway-C
4.
Configure server certificates and CA certificates on the Expressway-E
5.
Configure Unified Communications traversal zone on Expressway-C
6.
Configure credentials on Expressway-E
7.
Configure traversal server zone on Expressway-E
8.
Procedure 1 Configure Expressway-C for Mobile and Remote access
Step 1. Navigate to Configuration > Unified Communications > Configuration and set Mobile and
Remote Access to On.
Step 2. Click Save.
Step 3. Navigate to Configuration > Domains and click New.
Step 4. Enter the following values in the relevant fields:
Domain name—mmcvd.cisco.com

SIP registrations and provisioning on Unified

IM and Presence services on Unified

Deploy MRA and B2B Collaboration
CM—On
CM—On
Deployment Details
Deploy CUBE
PAGE 30