Network Detection - Mitsubishi Electric MELSEC iQ-R Series User Manual

Network Detection

"Network Detection" detects EtherNet/IP devices on the network and configures EtherNet/IP communication settings online.
Detecting the RJ71EIP91 and EtherNet/IP devices
Scan the network to detect the RJ71EIP91 and EtherNet/IP devices on the "Network Detection" tab.
Select the [Network Detection] tab.
*1 For the [Network Detection] tab, refer to the following.
Page 49 Window Structure
Display content
The "Network Detection" content is displayed.
"Network Detection" displays the RJ71EIP91 and EtherNet/IP devices.
(1)
(2)
(1) Indicates that the EDS file for the detected RJ71EIP91 or EtherNet/IP device is added in "Device Library".
(2) Indicates that the EDS file for the detected RJ71EIP91 or EtherNet/IP device is not added in "Device Library".
When detecting EtherNet/IP devices on the network, note the following points.
• The RJ71EIP91 and EtherNet/IP devices must be connected to the network.
• An IP address has been set to the EtherNet/IP device, and the IP address does not duplicate the IP addresses of other
EtherNet/IP devices.
• The EDS file of each EtherNet/IP device has been added to "Device Library". (The EtherNet/IP communication settings are
based on the EDS files or Generic EDS.)
*1 The EtherNet/IP device IP address can be set in the "Online Action" window. ( Page 62 "Online Action" window)
*2 EDS files can be added in the "EDS Management" window. ( Page 94 Adding the EDS file)
Perform the action related to "Network Detection" when it is set online. For the operating procedure, refer to
the following.
Page 96 Configuring settings online
3 EtherNet/IP Configuration Tool
60
3.1 Window Structure
*1
[Network]
*1
*2
[Read Network Configuration]