Mitsubishi Electric MELSEC iQ-R Series User Manual page 79

Item
*3
Ping [Ping] button
Loop
Stop on Error
[Clear] button
Ping Result
*1 Characters from A to Z, numbers from 0 to 9, "." (dot), "-" (hyphen), and "_" (underscore) can be used. For the first character of a name,
only characters from A to Z can be used.
*2 Cannot be set to a value from 127.0.0.0 to 127.255.255.255.
*3 Can be selected when EtherNet/IP Configuration Tool is switched to the online state. ( Page 50 File)
When an EtherNet/IP device has been added by "Network Detection", its IP address is registered
automatically. When an EtherNet/IP device has been added from "Device Library", manually enter its IP
address.
For the operations on "Network Detection" and "Device Library", refer to the following.
Page 60 Network Detection
Page 58 Device Library
Description
Pings the specified EtherNet/IP device.
Select this check box to repeatedly ping the device once every
100ms.
Sets whether to interrupt pinging if an error occurs when the
"Loop" check box is selected.
• Selected: Pinging will be interrupted if an error occurs.
• Not selected: Pinging will continue even if an error occurs.
Deletes the content of "Ping Result".
Displays the result of pinging.
Setting range

• Selected
• Not selected
(Default: Not selected)
• Selected
• Not selected
(Default: Not selected)


3 EtherNet/IP Configuration Tool
3.1 Window Structure
3
77