Mitsubishi Electric MELSEC iQ-R Series User Manual page 71

■[EtherNet/IP] tab
Configure settings related to the connection between the RJ71EIP91 and the EtherNet/IP device.
The [EtherNet/IP] tab can be set when "Advanced Mode" is selected. ( Page 50 File)
Item
Timeout FW_Open IO Connection Timing
FW_Open EM Connection Timing
EM Connected RPI
EM Request Timeout
Behaviour Allow Reset Explicit Message
Description
■[User Data] tab
This tab is not supported in the RJ71EIP91.
Description
Sets the response waiting time for the connection open request
sent from the RJ71EIP91 to the EtherNet/IP device during Class1
communications. (Unit: ms)
Sets the response waiting time for the connection open request
sent from the RJ71EIP91 to the EtherNet/IP device during Class3
communications. (Unit: ms)
Sets the communication cycle (RPI) for Class3 communications.
(Unit: ms)
Sets the response waiting time for Class3 communications. (Unit:
s)
Sets the behavior of the RJ71EIP91 when it receives a reset
request message.
• FALSE: Reset.
• TRUE: Do not reset.
Displays the description of the selected item.
Setting range
5000 to 8335840
(Default: 5000)
3000 to 8335840
(Default: 3000)
0 to 4294967
(Default: 10000)
0 to 65535
(Default: 10)
• FALSE
• TRUE
(Default: FALSE)

3 EtherNet/IP Configuration Tool
3.1 Window Structure
3
69