2.6
Writing Parameters
The parameters set on the RJ71EIP91 have different write destinations.
Parameter type
Module parameter
EtherNet/IP communication setting
For writing parameters to the CPU module, refer to the following.
GX Works3 Operating Manual
This section describes writing procedure to the RJ71EIP91.
Operating procedure
1.
Switch EtherNet/IP Configuration Tool to the online state.
[File]
[Go Online]
2.
Write the set parameters to the RJ71EIP91.
[File]
[Download]
The parameters written to the RJ71EIP91 with EtherNet/IP Configuration Tool are reflected when the following
operations are executed.
• 'EtherNet/IP communication start request' (Y10) is turned off and on.
• The module function block execution command is turned off and on.
2 PARAMETER SETTINGS
48
2.6 Writing Parameters
Configuration tool
GX Works3
EtherNet/IP Configuration Tool
Write destination
CPU module
RJ71EIP91