Application Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.3

Application Setting

Configure the Class1 communication auxiliary setting.
Class1 communication supplementary setting
Set the block data assurance per connection.
Item
*1
Block assurance per connection
*1 Cannot be set when "Mode Settings" is set to "Automatically H/W Test" under "Basic Setting".
*2 When "Enable" is set and the module FB is not used, it is necessary to read input data and write output data using 'Class1 Connection
Input data update state' (Un\G32768 to Un\G33023) and 'Class1 Connection Output data update state' (Un\G33024 to Un\G33279).
Description
Sets whether to perform data assurance per connection during Class1
communications.
Set this item to "Enable" and use the following module function blocks to prevent data
inconsistency.
• M+RJ71EIP91_Class1GetInputData
• M+RJ71EIP91_Class1SetOutputData
Setting range
• Disable
*2
• Enable
(Default: Disable)
2 PARAMETER SETTINGS
2.3 Application Setting
2
45