Specifications; General Specifications - Teledyne BOA Spot ID Series Quick Start Manual

Product Specifications

General Specifications

This following table lists the specifications of the BOA Spot Vision Sensor:
Specification
Memory
Image
I/O
Network
Serial
Power
Mechanical
Environment
Certification
BOA Spot ID Quick Start
Definition
Storage 256MB Storage; 256MB Program
1/3" CMOS; 3.75 μm pixel size, Global Shutter
Sensor
Resolution 640x480 and 1280x960
Type Monochrome Progressive Scan
Exposure 22 us to 1000 ms
Acquisition full-frame integration, 640x480 45 f/s, 1280x960 30 f/s
Maximum achievable speed is application dependent
Lens M12 or C Mount (factory configured)
Trigger 1 opto-isolated hardware trigger input
Software trigger via Ethernet or internal timer
Inputs 2 General purpose opto-isolated.
Outputs 3 General purpose opto-isolated
Strobe 1 output may be used to sync an external light source
Status Network + 2 application assigned LEDs
Ethernet 10/100 BaseT
RS232 1 Port on I/O connector
24 V on I/O or Ethernet connectors (not IEEE 802.3af PoE compliant)
Device (BOA Spot) 5.64 Watts; 235 mA maximum @ 24 V
Lamp (LED Ring-Light) 9.74 Watts; 406 mA maximum @ 24 V
Material Machined Aluminum with anodize/paint finish
Mounting 8 x M4
Size 58.2 mm x 61.2 mm x 53 mm with M12 lens cover,
58.2 mm x 61.2 mm x 91.5 mm with C Mount lens cover
Temp -10°C (14°F) to 50°C (122°F) Operating (-60°C to 80°C) Storage
Protection IP67 with cables attached
Shock 70 G
FCC Class A and EU CE
25
Version 1.2; 2017-11-20