4. Click on "Tool Setup" in the Navigation bar.
5. Click on the green "Take a Picture" button to snap an image.
If using triggered acquire, click the button to the right (will show as green)
6. Click on the tool you want to use in the "Select Tools" panel.
Draw the Region Of Interest (ROI) on the image in which the tool will inspect.
This can be the whole image or a subset of the image. You can construct a
single or multiple ROIs if required.
BOA Spot ID Quick Start
* IDS model tools shown
By default the tool reads the first code
it finds. You can change the expected
number in the tool property panel
(mouse right-click on ROI to open).
45
Version 1.2; 2017-11-20