Configure Client Pc - Teledyne BOA Spot ID Series Quick Start Manual

Configure the Client PC for BOA Spot Access
BOA Spot is compatible with computers running Windows 7, 8.1 and 10. PC Security
settings and the Network Interface should be configured for the BOA Spot. You must
have Administrator Privileges to perform the steps below.
Note: The paths to some tools depend on the Windows configuration and appearance
settings. Some items may appear in the left or the right pane in menus.
A: System Performance Settings
This will increase the performance of your PC in general, and will make the BOA Spot
client application perform better. However, this turns off the visual effects of Aero on W7
or W8. The application will work incorrectly if you do not perform these steps.
1. Open the Control Panel. Click on
"System" & Security". Click on "System".
2. Click on "Advanced Settings" or the
"Advanced" tab. Under "Performance",
click on "Settings".
3. Click the Visual Effects tab. Click the
"bubble" beside "Adjust for Best
Performance".
4. Click on "Advanced Settings" or the
"Advanced" tab. Click the check boxes
beside "Smooth edges of screen fonts"
and "Use visual styles on windows and
buttons". The performance setting will
change to "Custom".
Note: Some installations may not have the
"Use visual styles..." option.
5. Click "OK". The appearance will change to
resemble Windows Classic.
B: User Account Control (UAC) Settings
UAC will interfere with loading and running the BOA Spot iNspect application software.
If your PC is in a closed factory environment not connected to the Internet, it is safe to
turn off UAC. If your PC is connected to an office network and the Internet, this may not
be safe. You may wish to choose the next higher security setting, and manually approve
at the prompts.
BOA Spot ID Quick Start
34
Version 1.2; 2017-11-20