Components - Teledyne BOA Spot ID Series Quick Start Manual

BOA Spot Components
BOA Spot Vision Sensors are shipped with the components listed below. Take a few
moments to verify that everything has arrived in good condition. If your product has
been visibly damaged during shipment or is missing parts, please contact your Teledyne
DALSA representative immediately.
Standard components (ship with every BOA Spot Vision Sensor):
Component
BOA Spot Sensor
BVS-SP-0640M-IDL-TFF-C
BVS-SP-1280M-IDL-TFF-C
Mounting Screw Kit
* Lens and ring-light are only specified for the M12 version, not available with C Mount lens.
Optional components (sold separately):
Component
Cables
A-BVS-E8S-X
A-BVS2-IO12S-X
BVS-PL-101
A-BVS-PL101S-X
BVS-PL-100
A-BVS-SP-LCG-45
A-BVS-M12-P
A-BVS-SP-M12-LKIT
Lights
Filters
BOA Spot ID Quick Start
Description
BOA Spot Fully integrated vision system with 640x480 or 1280x960
monochrome sensor, lens, processing engine, embedded software,
communications and light control.
(L= feature level: S or E); (T = lens type: M= M12, C=C Mount);
(FF* = focal length in mm: 06, 08, 12, 16); (C= Ring-Light Color:
R=red, B=blue, W=white*)
M4 screws for mounting the BOA Spot (Qty 4)
Description
M12-RJ45 Ethernet cordset (X= length: 5=5 m, 10=10 m)
M12 single-ended IO cordset (X= length: 5=5 m, 10=10 m)
Panel Link breakout module. Provides convenient panel access to
BOA Spot I/O and serial port
M12 IO cordset to PL-101 (X= length: 5=5 m, 10=10 m)
Panel Link breakout module for Passive Power on Ethernet
Lens Cover for C Mount lens option. Required for IP67 compliance.
(45 mm internal lens length)
M12 plug for IP67 compliance
M12 lens kit (includes 6, 8, 12 & 16 mm lenses)
Various Lighting options available from Teledyne DALSA
Various C-Mount filters available from Teledyne DALSA
10
Version 1.2; 2017-11-20