Teledyne BOA Spot ID Series Quick Start Manual page 46

7. Optionally: Click on "Setup Communications" in the Navigation bar.
This panel is where you would setup connections to outside devices (i.e. PLCs or
storage devices) for control/status communication and/or an FTP connection for
storing images.
After a connection has been established, the script tool is used to define what is
communicated between BOA Spot and the connected device(s). Typically this is
inspection results or application controls, such as selecting which solution to run
for a given process.
Refer to the BOA Spot Communication Guide and Script Guide for more detailed
information.
BOA Spot ID Quick Start
Select connection method
Set up connection method
Add connection method
Delete connection method
Set up image logging via FTP
Set up discrete I/O (next page)
46
Version 1.2; 2017-11-20