Call Forwarding - Destination; Cid (Caller Id) Call Display - NEC Univerge SV9300 Series User Manual

CALL FORWARDING -
DESTINATION
This feature allows a station user to set Call
Forwarding - All Calls from another station within
the system.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO SET CALL FORWARDING -
DESTINATION
1. Dial Call Forwarding - Destination
feature access code or press Call
Forwarding - Destination feature
key.
You will receive a special dial tone.
SET
4:26 PM MON 11 MAY 2015
2. Dial station number to be forwarded
to this line.
Wait for service set tone.
TO CANCEL CALL
FORWARDING -
DESTINATION
1. Dial Call Forwarding - Destination
Cancel feature access code or press

Call Forwarding - Destination

Cancel feature key.
CANCEL
4:26 PM MON 11 MAY 2015
2. Dial station number to cancel.
3. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Call Forwarding - Destination is cancelled.
CID (CALLER ID) CALL
DISPLAY
TO DISPLAY CALLING PARTY
INFORMATION
201
TO REDISPLAY CALLING
PARTY INFORMATION
201
79
FEATURE OPERATION
Without answering incoming calls or held calls that
terminate to the Line keys of a terminal, the calling
party's information can be confirmed by the
indications on the LCD.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press CID Call Display feature key.
Line key lamp lights red. →
Calling Party information is displayed.
R-TONE MIC
1. While on a call press CID Call
Display feature key to recall the
Calling Party Information.
Calling Party information is displayed.
201
JAMES SMITH