2. Position a single stacking cup (011-104349-XX) over one of the empty screw holes so the
higher side of the cup faces outward and aligns with the projector skin.
3. Insert an M6 screw (012-101132-XX) through the stacking cup mounting hole and into the
projector.
4. With a torque wrench, tighten the M6 screw to 15 in-lb.
CP2308-C Installation and Setup Manual
020-102492-01 Rev. 1 (01-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Installation and setup
12