Christie CP2308-C Installation And Setup Manual page 16

1. Remove the lens surround.
2. Turn the lens clamp on the front of the projector to the open position with a hex key.
3. Position the lens so the lens retaining ring mounts align with the lens mount.
4. Remove the lens caps from the front and rear of the lens.
Lens caps must be removed or they can melt and damage the lens.
5. Insert the lens straight into the lens mount opening without turning.
Magnets inside the lens mount help position the lens.
6. Insert and tighten the two lens mount hex screws shipped separately with the projector.
CP2308-C Installation and Setup Manual
020-102492-01 Rev. 1 (01-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Installation and setup
16