Adjusting The Image; Activating The Intelligent Lens System; Creating An Auto Calibrated Ils File; Correcting Vignetting - Christie CP2308-C Installation And Setup Manual

Adjusting the image

Learn how to adjust image geometry so it displays correctly.

Activating the Intelligent Lens System

Activate the Intelligent Lens System (ILS) to automatically adjust the position of the lens.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap Lens/ILS.
3. In the right pane, tap the ILS Installed slider.
The color of the slider changes to green to indicate it is active.

Creating an auto calibrated ILS file

An auto calibrated Intelligent Lens System (ILS) file sets the lens distance automatically when it is
associated with a specific channel.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. Tap Create.
3. Type a name for the ILS file and tap Create.
4. Tap Auto Calibrate.
5. Tap Continue.
6. Tap Save.

Correcting vignetting

An image that is brighter at the center than it is at the sides needs vignetting correction.
If your image suffers from vignetting, the lens has reached the end of its offset travel range. If your
installation does not allow the image to be centered with the center of the screen, move the entire
projector in the direction of lens travel.
CP2308-C Installation and Setup Manual
020-102492-01 Rev. 1 (01-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
25