Soft Keys - NEC univerge sv7000 User Manual

1.

SOFT KEYS

The Soft Keys on DT750 provide a set of functions on
the LCD that adapts to the changing state of the
telephone. While default Soft Key settings are
provided, desired functions can be assigned to
individual stations as required. The Soft Keys, at the
bottom of the LCD, can display the names of available
functions, names of user-assigned functions and
names of functions assigned by a specific Soft Key
pattern. Displayed Soft Keys can vary, depending on
the state of the phone and/or when the Next/Previous
button is pressed.
7:25 AM MON 18 JUL 2008
MIC DND
Exit
Exit Key
Press to exit from the Menu or Help mode and go back
to the time display.
Help Key
Press the Help Key, then desired Soft Key for helpful
information about that key.
MIC (Microphone)
Press the Soft Key below "MIC" to activate or
deactivate the Microphone. LED on Mic key will
illuminate when Mic is on.
DND (Do Not Disturb)
Press the Soft Key to reject call termination to the
preassigned station.
>>>
Help
10
Default Displays for Each Status
Default Soft Key settings are provided corresponding to
particular functions. Different Soft Key settings are
displayed at the bottom of the LCD depending on the
status, as shown below.
Different patterns of Soft Key settings can be registered
for individual call status and assigned to individual
terminals as required.
IDLE
7:26 AM
MIC DND
DIAL TONE/DIALING
4:26 PM
(1)
MIC PICK
Push >>>
(2)
4:26 PM
FDN FDB
RINGING
4:26 PM TUE 13 APR 2004
MIC VOICE
MON 17 JUL 2008
>>>
TUE 13 APR 2004
FDA >>>
TUE 13 APR 2004
>>>
>>>