Table of Contents
Advertisement
2-1. Preparing for Measurement
Initial Screen (ID Entry Screen)
Following a brief interval after the power is turned on, the ID entry screen appears. This screen is
called the "initial screen" in this manual. The ID is entered in this screen.
You can select whether the ID input type is all numbers, or both numbers and alphabetical
characters. It is recommended that you decide which type of ID will be used in advance.
The first time the power is turned on, the left-hand screen below appears. This screen is for
number entry. If you wish to use combined number and character IDs, change the "ID Input type" in
advance.
Refer to "3-2. User Default Settings" "ID Input Type" (page 76).
Initial screen (ID input type: numbers)
If you manage data by "Order Number" associated with the electronic chart, you can change the
initial screen from the ID entry screen to the order number entry screen. To use order numbers,
patient information must be stored in advance.
Refer to "3-2. User Default Settings" "Search Key" (page 76).
Initial screen: order number entry screen
(Input type: numbers)
[MAIN MENU] button:
[SWITCH TO ID] button:If you are measuring a patient that does not have an order number, you
24
Touch this to change to the main menu screen. The main menu screen is
used to configure basic settings (refer to page 74).
can change back to ID number entry.
Initial screen (ID input type: numbers and characters)
Initial screen: order number entry screen
(Input type: numbers and characters)
Advertisement
Table of Contents
