Table of Contents
Advertisement
2-1. Preparing for Measurement
Synchro Measurement Setting
In synchro measurement, blood pressure is measured twice. In the second measurement, the
measurement timing is automatically adjusted based on the blood pressure value of the first
measurement and all four limbs are measured simultaneously.
1.
Press the [SYNC MEAS.] button.
"ON" or "OFF" is already selected. If the setting does
not need to be changed, go to the next item.
2.
Press the [SYNC MEAS.] button to select "ON" or
"OFF".
The selection switches between "ON" and "OFF" each
time you press the [SYNC MEAS.] button.
Selecting the Doctor
Select the doctor from the list. The list must be stored in advance.
Refer to "3-4. Facility name / Doctor / Technician / Category Settings" (page 86).
1.
Press the [DOCTOR] button.
2.
Select the doctor and press the [OK] button.
• If a doctor name is not necessary, press
<UNSELECT>.
• To cancel entry, press the [CANCEL] button.
38
Advertisement
Table of Contents
