Basic Measurement; Viewing The Measurement Screen - Omron Colin VP-1000 plus Manual

2-2. Basic Measurement

Viewing the Measurement Screen

After the patient information has been entered and the cuffs and sensors have been attached to
the patient, measurement can be started.
Press the [NEXT] button in the new patient information registration screen or the patient
information review screen to proceed to the measurement screen.
Notes:
• If "ECG" was set to "OFF" in the "SELECT MEASUREMENT SENSOR" settings when the
patient's information was entered (refer to page 34), ECG messages and the ECG wave will
not appear.
• If "PCG" was set to "OFF" in the "SELECT MEASUREMENT SENSOR" settings when the
patient's information was entered (refer to page 34), PCG messages, the PCG level, and the
PCG wave will not appear.
47