Omron Colin VP-1000 plus Manual page 11

Non-invasive vascular screening device
Table of Contents

Advertisement

Caution:
Safety rules when using the product
Observe the rules below when handling the power cord. Failure to observe these rules may result in
electric shock or device failure.
•Do not damage the cord
•Do not break the cord
•Do not modify the cord
•Do not bend or pull on the cord with undue force
•Do not twist the cord
•Do not tightly coil the cord when in use
•Do not place heavy objects on the cord
•Do not let the cord become pinched
Insert the power plug all the way into the outlet. Otherwise electric shock, short circuiting, or fire may
result.
Wipe dust off the power plug. Otherwise electric shock, short circuiting, or fire may result.
After using the device, turn the power switch to the "off" position and disconnect the power plug.
Failure to do so may cause deterioration of the insulation and result in electric shock, current
leakage, or fire.
When removing the power plug from the outlet, grasp and pull on the plug, not the cord. Pulling on
the cord may break wires and cause a short circuit, resulting in fire or electric shock.
If a power failure occurs while using the device, turn the power switch to the "off" position and
disconnect the power plug. Failure to do so may result in a product failure or other problem.
If the device becomes wet, wipe it completely dry with a soft cloth before use. Otherwise electric
shock, short circuiting, or fire may result.
Safety rules when performing measurement
If the patient has any of conditions below, do not perform measurement. Otherwise incorrect
diagnosis and treatment may result.
•The patient has an aneurysm
•The patient has insufficient peripheral circulation, noticeably low blood pressure, or low body
temperature.
•The patient frequently has an irregular pulse.
In the following situations, check by auscultation or palpation. Otherwise incorrect diagnosis and
treatment may result.
•When irregular pulse waves are indicated.
External vibration or patient movement during measurement may cause an incorrect indication.
•When an error occurs or when a measured value is questionable.
1-4. Safety Information
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colin bp-203rpe iii

Table of Contents