Table of Contents
Advertisement
2-2. Basic Measurement
3.
Make sure that measurement has ended.
• When measurement ends, the measurement results
screen appears.
"
Refer to
Contents of the Measurement Screen
(page 48).
• If the number of printed pages is set in "Print Default
Settings" (page 80), a measurement results report is
printed.
"
Refer to
Measurement Results Reports
• To print a measurement results report again, press the
[PRINT REPORT] button, press a number of printed
pages selection (1), and then press [PRINT] (2).
• To repeat a measurement, press the
[REMEASUREMENT] button, and then select the
repeat measurement condition (1) and prepare for
measurement.
4.
To perform stress test, go to page 67 without
performing the next steps.
5.
Press the [END] button.
6.
Remove the cuffs and sensors from the patient.
52
"
"
(page 54)
Measurement results screen
Advertisement
Table of Contents
