Omron Colin VP-1000 plus Manual page 79

HR Synchronized Tone
A beep sound can be made at each R wave of ECG during measurement. Select whether or not
this beep sound is made.
Selections
ON
OFF
Measurement Sensors
Set default settings for attachment of sensors on the patient. Specify settings for ECG, PCG.
Selections
ON
OFF
Measurement Sites
Set default settings for attachment of cuffs on the patient.
• Cuffs are normally attached on both brachia and both ankles.
• If a shunt is placed in an upper arm for hemodialysis, do not attach an arm cuff to or perform
measurement on that brachium.
• Measurement cannot be performed with both ankle cuffs and toe cuffs attached.
Selections
RIGHT BRACHIUM /
LEFT BRACHIUM
RIGHT LEG /
LEFT LEG
Synchro Measurement
Set the default setting for "synchro measurement".
Selections
ON
OFF
Make a beep sound
Do not make a beep sound
Attached.
Not attached.
ON Arm cuff attached.
OFF Arm cuff not attached.
ANKLE Ankle cuff attached.
OFF Ankle cuff not attached.
Perform synchro measurement.
Do not perform synchro measurement.
3-2. User Default Settings
Description
Description
Description
Description
77