Table of Contents
Advertisement
18
Over all grade
19
Vascular age
Risk of
20
Pathogenesis
Comments /
21
Revising point for
measurement
22
Graph 2
Simple Evaluation
23
of Heart Function
When "Show result" is selected in "Over all grade" in "Print Default Settings", an
over all grade of the examination results is shown using three levels (A, B, C)
(refer to page 84).
When "Vascular age" or "Vascular age (N)" is selected in "Stiffness" in the "Print
Default Settings", this shows arterial stiffness as a vascular age
(refer to page 84).
When "Risk of Pathogenesis" is set to "ON" in the "Print Default Settings", the
risk of cardiovascular disease occurring within the next 10 years is calculated
based on age, sex and baPWV, and displayed (refer to page 84).
This shows errors detected during measurement and points to be checked to
prevent errors.
The indices are shown on a graph. Details are explained from page 58.
STI (Systolic Time Interval) is printed. If PCG is set to "OFF" for MEAS.
SENSOR when entering patient information, this area will be blank. Refer to
page 34 for more detail on PCG, and the detail on STI is in Quick Manual.
2-3. Measurement Results
57
Advertisement
Table of Contents
