Table of Contents
Advertisement
Entering and Editing Patient Information
Enter the patient information and edit previously stored patient information.
Notes:
• Do not assign multiple IDs to a single patient. Even if all other information such as the
name is the same, the system will treat different IDs as different patients. In this case, you
will not be able to make full use of the device's functions for long-term storage of
measurement histories and diagnosis support.
• The number of digits must be the same or the ID will treated as two separate IDs.
Example: "300" and "0300".
The above will be treated as two separate IDs.
• The [ID], [SEX], [BIRTH DATE], and [HEIGHT] must be entered.
If not entered, measurement cannot be performed.
• Once ID number or order number is entered in the initial screen, the "ID" or "Order
Number" cannot be changed.
• Take care to avoid mistakes when entering information and numerical values,
as the examination results will be printed based on this information.
• If you return to the initial screen without saving patient information,
the information will be cleared.
2-1. Preparing for Measurement
25
Advertisement
Table of Contents
