Table of Contents
Advertisement
Warning:
Safety rules when using the product
Do not use a frayed or damaged power cord or plug. Otherwise electric shock, short circuiting, or fire
may result.
Do not touch the power plug with wet hands. Otherwise electric shock or injury may result.
Be sure to plug the three-prong power plug into a grounded (three-prong) outlet for medical use
(when a printer is included). Otherwise electric shock or current leakage may result.
Use a dedicated outlet. Otherwise electric shock or current leakage may result.
Do not poke or scratch the buttons or display with a sharp or pointed object. Incorrect diagnosis and
treatment or an accident may result.
Do not connect the power plug to the outlet if the electrical ratings are outside the specified range below:
100 - 240 VAC. This may cause fire.
Do not touch the unit when discharging a defibrillator.
Safety rules when performing measurement
This device is only to be used by qualified medical personnel, or under the guidance of such
personnel. Otherwise incorrect diagnosis and treatment or device failure may result.
The results of measurement should only be interpreted by a doctor. If you are concerned about a
measurement result, consult your doctor. Otherwise incorrect diagnosis and treatment may result.
This device is intended to perform measurement for examination. Do not use the device for patient
monitoring. Otherwise an accident may result.
If pressurization does not stop during measurement or another abnormal condition occurs, remove
the cuff or air tube and disconnect the power. Otherwise peripheral nerve may be damaged.
Use only the specified supplies for the cord, cuff, USB devices, and other parts. Do not install other
than specified options. Otherwise an accident may result.
Do not connect the air tube or cuff to any other device tubes attached to the body. Otherwise air may
enter the blood vessels and an accident may result.
1-4. Safety Information
7
Advertisement
Table of Contents
