Table of Contents
Advertisement
3-8. Advanced Registration of Patient Information
Registration Procedure
Press the [MAIN MENU] button in the initial screen. Perform "Register / Manage patient info" from
the main menu screen.
A. Importing a text file
1.
You will need a USB flash drive.
2.
Create the data on a computer.
Create the data as follows:
• Data format: text file*
• File name: PATIENT.CSV
• ID: Alphanumeric characters (upper case), hyphens (-); maximum of 13 digits
• Name: Alphabet, maximum of 40 characters
• Sex: Code input; female = 0, male = 1
• Birth date: Numeric characters, / (slashes); yyyy/mm/dd (zeros can be omitted)
• Height: Numeric characters, 120 to 210, units = cm
• Weight: Numeric characters, 25.0 to 300.0, units = kg
• Waist: Numeric characters, 30 to 250, units = cm
• Disease: Code input*
• Measurement site: Code input*
• Doctor: Character type same as for "Name"
• Technician: Character type same as for "Name"
• Category: Character type same as for "Name"
• Order number: Numeric characters, hyphens(-); maximum of 16 digits
1
*
An XML file can also be imported. To use an XML file, consult
a dealer or an Omron Healthcare technical support
representative.
2
*
Code Table (refer to page 107)
3.
Save the created data to USB flash drive and connect it to the USB port on the device.
4.
Press the [REGISTER / MANAGE PATIENT INFO]
button.
5.
Press the [ADD NEW ID] button.
106
1
2
, 1 character
2
, 1 character
ABC,
GHI,
DEF,
JKL,
Internal,
Internal,
Advertisement
Table of Contents
