Table of Contents
Advertisement
2-1. Preparing for Measurement
Entering the ID Number
Follow the steps below to enter an ID number for the first time or check existing ID numbers. Up to
13 characters (including hyphens "-") can be entered. ID number must be entered.
For entering an Order number, up to 16 digits of number (including hyphens"-") can be entered.
First-time patient
Patient information
not registered
Patient for whom
patient information is
already registered
Patient information
already registered
Patient for whom
re-measurement is
necessary due to
inadequate
measurement results
Previously measured
(patient information
already registered)
*The initial screen for "ID input type: numbers" is shown as an example. The key arrangement is different for "ID input
type: numbers and characters".
26
1 Enter a new ID number
2 Press the [SEARCH / NEXT] button
1 Enter the ID number
2 Press the [SEARCH / NEXT] button
1 Enter the order number
2 Press the [SEARCH / NEXT] button
1 Press the [PREVIOUS ID] button
2 Check the ID number
3 Press the [SEARCH / NEXT] button
1 Press the [SWITCH TO ID]
button
* Press the [SWITCH TO ID] button
to change to the ID entry screen
Advertisement
Table of Contents
