Omron Colin VP-1000 plus Manual page 85

Standard Report Layout
Graph 1
■
Select the type of graph to be printed on the lower left of the standard report.
(Example: page 55)
Selections
1. Age-baPWV
2. Age-baPWV/SD
3. Age-baPWV/SD+Nomo
4. Age-baPWV/Nomo (1)
5. Age-baPWV/Nomo
6. ABI-baPWV
7. SYS-baPWV
8. DIA-baPWV
9. baPWV Trend
10. ABI Trend
11. Vascular Comment
Graph 2
■
Select the type of graph to be printed on the lower center of the standard report. Selectable graph
types are the same as for graph 1 above. The initial setting is [3. Age-baPWV/SD+Nomo].
Dr. support
■
Set the Dr. support level to be printed on the standard report.
Selections
LEVEL 2 (DIAGNOSE)
LEVEL 1 (NOTICE)
LEVEL 0 (NO COMMENT)
This shows baPWV vs. age on the horizontal axis.
Graph shading is based on baPWV.
This shows baPWV vs. age on the horizontal axis.
Graph shading is based on the SD line.
This shows baPWV vs. age on the horizontal axis.
Graph shading is based on the SD line.
(Shows mean age ± SD line and mean line of applicable blood pressure
group.)
This shows baPWV vs. age on the horizontal axis.
Graph shading is based on baPWV.
(Shows mean age ± SD line and mean line of applicable blood pressure
group.)
This shows baPWV vs. age on the horizontal axis.
(Shows mean line of each blood pressure group.)
This shows baPWV vs. ABI on the horizontal axis.
This shows baPWV vs. maximum blood pressure value on the horizontal
axis.
This shows baPWV vs. minimum blood pressure value on the horizontal
axis.
This shows baPWV vs. date on the horizontal axis.
This shows ABI vs. date on the horizontal axis.
This shows comments on vascular sclerosis and foot vascular clogging.
This is the same content as in the patient report.
Print the probable disease ("Possibility of constriction", etc.) that can be
inferred from the measurement results.
Print facts such as "Measured baPWV is higher than mean value".
Print information on reliability such as "Reliability of measurement results
low due to noise".
3-3. Print Default Settings
Description
Description
83