Report Type
The report type can be set for the patient report and trend report. Refer to the examples starting on
page 54. Configure the settings in accordance with your examination policies, including the print
conditions and report layout.
Standard Report
■
This report is for the doctor. There is one type.
Patient Report
■
There are four types. For No.1, No.2, and No.4 (No.4 is for the optional HMC package), one of two
layouts can be selected.
Refer to "Patient Report" (page 60).
Selections
NO.1
NO.2
NO.3
NO.4*
* No. 4 is only enabled when the optional HMC package is used. For details, see the manual for the HMC package.
Trend Reports
■
Refer to "Trend Report" (page 64).
Selections
STANDARD
HMC*
* This is only enabled when the optional HMC package is used. For details, see the manual for the HMC package.
This type shows measured values, graphs, and images in a uniform
arrangement.
This type focuses on arterial stiffness and arterial stenosis in graph format.
This type shows the risk of cardiovascular disease using easy-to-
understand illustrations.
This type is for the optional HMC package.
This type shows measurement data trends based on comparison with past
data.
This type is for the optional HMC package.
3-3. Print Default Settings
Description
Description
81