Table of Contents
Advertisement
2-1. Preparing for Measurement
Setting the Measurement Sensors
1.
Press the [MEAS. SENSOR] button.
2.
Set the measurement sensors.
• Specify settings for the ECG, PCG.
Sensor attached: [ON]
Sensor not attached: [OFF]
3.
Press the [OK] button.
To cancel entry, press the [CANCEL] button.
Note:
Even when ECG is "OFF", if the HR Synchronized tone setting is "ON" and the ECG clip is
attached, the beep sound will be heard.
34
Advertisement
Table of Contents
