Table of Contents
Advertisement
AC Power Cable (Australia
Standard)
3.5 Handling and placement
Warning: The battery rack is IP00. It must be installed in a restricted access area;
Warning: The PowerCube-M1 is a high voltage DC system, operated by qualified and authorized
person only.
3.5.1 Handling and placement of the battery module
Single battery module is 48kg. If without handling tools must more than 2 men to handling with it.
If install in high place of the rack it must more than 3 men.
3.5.2 Handling and placement of the rack
If without handling tools must more than 4 men to handling with it.
3.5.3 The fix and installation of the rack
The rack must be fixed on the basement and carriage on the wall with M10 screws.
Battery rack basement holes bitmap (unit: mm):
Battery rack wall fixed holes bitmap (unit: mm):
Black/2.5m/3*0.75mm2/Australia
Standard
Front side
9 / 32
pcs
1
19PIMV0802
Advertisement
Table of Contents
