Handling And Placement; Handling And Placement Of The Battery Module; Handling And Placement Of The Base; Requirements Of Installation Site - Pylontech Force-H3 Operation Manual

Lithium phosphate energy storage system

Table of Contents

3.4 Handling and Placement

Warning: The battery pile's power terminals has high DC voltage. It must be installed in

a restricted access area;

Warning: Force-H3 is a high voltage DC system, operated by qualified and authorized

personnel only.

Warning: Single battery module is 39kg. The battery module must be handled by more

than 2 personnel if there're no handling tools.

The weight of the base is light, which a single person can handle with.

A. Force-H3 system working temperature range: -10℃~55℃; Optimum temperature: 18℃~28℃.

DO NOT expose the battery system to direct sun light. It is suggested to build sunshade

equipment. In cold area a heating system is required.

B. Force-H3 system must not be immersed in water. The battery base cannot be exposed to rain

or other water sources. As a suggestion, the base's height shall be >300mm above the ground.

C. The support surface should have sufficient load capacity to support the weight of whole

battery system (130~300kg).

D. Force-H3 system bust be installed on a fixed and flat support surface.

NOTE,

The above illustration is just for reference. The quantity of the battery modules is based on

your practical system.

Table of Contents