Handling And Placement; Handling And Placement Of The Battery Module; Handling And Placement Of The Rack; The Fix And Installation Of The Rack - Pylontech PowerCube-X1 Operation Manual

3.5 Handling and placement

Warning: The battery rack is IP00. It must be installed in a restricted access area;
Warning: The PowerCube-X1/X2 is high voltage DC system, operated by qualified and authorized
person only.

3.5.1 Handling and placement of the battery module

Single battery module is 24/32kg. If without handling tools must have more than 1 man to handling
with it.

3.5.2 Handling and placement of the rack

If without handling tools must have more than 4 men to handling with it.

3.5.3 The fix and installation of the rack

The rack must be fixed on the basement and carriage on the wall with M10 screws.
Battery rack basement holes bitmap (unit: mm):
Front side
Battery rack wall fixed holes bitmap (unit: mm):
19 / 38 EU20PIXV0501