Handling And Placement; Handling And Placement Of The Battery Module; Handling And Placement Of The Base; Selection Of Installation Sites - Pylontech Force-H1-V2 Operation Manual

Lithium-ion phosphate energy storage system

Table of Contents

3.4 Handling and placement

Warning: The battery pile's power terminals are high voltage DC. It must be installed in a

restricted access area;

Warning: Force-H1 is a high voltage DC system, operated by qualified and authorized

personnel only.

Single battery module is 36kg. If without handling tools must have more than 2 men to

handling with it.

The base is light, single person can handle with it.

A. Force-H1-V2 system working temperature range: 0℃～50℃; Optimum temperature:

18℃～28℃. Do not place the battery system in direct sun light. It is suggested to build

sunshade equipment. In cold area the heating system is required.

B. Force-H1-V2 system must not be immersed in water. Cannot be placed the battery base

in rain or other water sources. As a suggestion, the base's height shall >300mm above the

ground.

C. The base's weight capacity should support the weight of whole battery system

(130~300kg).

D. Force-H1-V2 system bust be installed on fixed ground.

Table of Contents