Table of Contents
Advertisement
OPC9000 series − Instruction manual v1.0
4 Mechanical installation
4.1 Requirements
The device is intended to be installed in a recess in a wall or cabinet.
•
•
The installation site must be accessible from the rear.
•
The wall can be between 1.5 and 6 mm thick.
The operating company must ensure that the wall can support the weight of the device.
•
The external device dimensions are given in Section 11 Dimensional drawings.
4.2 Installation recess OPC9016
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
17
Advertisement
Table of Contents
