Network Config; Software Upgrade - Dahua DH-PFS3206-4P-96 User Manual

3.3.2 Network Config

You can configure device IP address, subnet mask and default gateway via network config.
Step 1
Select "System Settings > Network Config", the system will display the interface which is shown in Figure
3-4 below.
Figure 3-4
Step 2
Configure "IP address", "Subnet mask", "Default gateway" and "DNS server".
Step 3
Click "Save" and complete configuration.

3.3.3 Software Upgrade

You can upgrade software to the latest version by software upgrade.
Step 1
Select "System Settings > Software Upgrade", the system will display the interface which is
shown in Figure 3-5 below.
- 8 -