Getting Started
Much of this material, although found in the Startup Guide, is available for your convenience to
make sure the module and software are properly installed as a prerequisite for conducting diagnostic
procedures. If you are familiar with this material, proceed to
esses and References
In this section:
Follow the Startup Sequence
l
Step 1: Unpack and Inspect the Module
l
Step 2: Install the Software
l
Step 3: Install the Module
l
Follow the Startup Sequence
Closely follow the startup process flow in this document. Deviating from the sequence can
cause unpredictable system behavior, damage your system, and may cause personal injury.
Step
1: Unpack
and Inspect
Agilent M9302A PXI Local Oscillator Service Guide
(page 16).
(page 9)
(page 10)
(page 10)
(page 13)
Step
2: Install Drivers and Software
High-Level Diagnostic Tools, Proc-
Step
3: Install Module
Getting Started
9