Table of Contents
Advertisement
Notices
© Agilent Technologies, Inc. 2010-2013
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent Tech-
nologies, Inc. as governed by United States
and international copyright laws.
Manual Part Number
M9302-90009
Edition
Version 1.1.0
January 2013, build 2013.01.18.1320
Printed in USA
Agilent Technologies, Inc.
Sales and Technical Support
To contact Agilent for sales and technical
support, refer to the "support" links on the
following Agilent web resources:
www.agilent.com/find/M9302A
n
uct-specific information and support,
software and documentation updates)
www.agilent.com/find/M9392A
n
uct-specific information and support,
software and documentation updates)
www.agilent.com/find/assist
n
(worldwide contact information for
repair and service)
Information on preventing damage to your
Agilent equipment can be found at
www.agilent.com/find/tips.
Regulatory Compliance
This product has been designed and tested
in accordance with accepted industry
standards, and has been supplied in a safe
condition. To review the Declaration of
Conformity, go to
http:/regulations.corporate.agilent.com
/DoC/search.htm.
Warranty
The material contained in this document is
provided "as is," and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted
by applicable law, Agilent disclaims all war-
ranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection
with the furnishing, use, or performance of
this document or of any information
contained herein. Should Agilent and the
user have a separate written agreement
with warranty terms covering the material in
this document that conflict with these
terms, the warranty terms in the separate
agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accord-
ance with the terms of such license.
(prod-
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or sub-
(prod-
contract, Software is delivered and licensed
as "Commercial computer software" as
defined in DFAR 252.227-7014 (June 1995),
or as a "commercial item" as defined in FAR
2.101(a) or as "Restricted computer soft-
ware" as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation or
contract clause. Use, duplication or dis-
closure of Software is subject to Agilent Tech-
nologies' standard commercial license terms,
and non-DOD Departments and Agencies of
the U.S. Government will receive no greater
than Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Gov-
ernment users will receive no greater than
Limited Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any tech-
nical data.
Safety Notices
The following safety precautions should be
observed before using this product and any
associated instrumentation.
This product is intended for use by qualified
personnel who recognize shock hazards and
are familiar with the safety precautions
required to avoid possible injury. Read and
follow all installation, operation, and main-
tenance information carefully before using
the product.
ARNING
If this product is not used as specified,
the protection provided by the equipment
could be impaired. This product must be
used in a normal condition (in which all
means for protection are intact) only.
The types of product users are:
Responsible body is the individual or
n
group responsible for the use and
maintenance of equipment, for ensur-
ing that the equipment is operated
within its specifications and oper-
ating limits, and for ensuring oper-
ators are adequately trained.
Operators use the product for its
n
intended function. They must be
trained in electrical safety pro-
cedures and proper use of the instru-
ment. They must be protected from
electric shock and contact with haz-
ardous live circuits.
Maintenance personnel perform rou-
n
tine procedures on the product to
keep it operating properly (for exam-
ple, setting the line voltage or replac-
ing consumable materials).
Maintenance procedures are
described in the user documentation.
The procedures explicitly state if the
operator may perform them. Other-
wise, they should be performed only
by service personnel.
Service personnel are trained to
n
work on live circuits, perform safe
installations, and repair products.
Only properly trained service per-
sonnel may perform installation and
service procedures.
Advertisement
Table of Contents
