Table of Contents
Advertisement
PRODUCT MARKINGS:
The CE mark is a registered trademark of the
European Community.
The C-Tick mark is a registered trademark of
the Australian Spectrum Management
Agency.
This symbol indicates product compliance
with the Canadian Interference-Causing
Equipment Standard (ICES-001). It also iden-
tifies the product is an Industrial Scientific
and Medical Group 1 Class A product (CISPR
11, Clause 4).
This symbol indicates separate collection for
electrical and electronic equipment, man-
dated under EU law as of August 13, 2005.
All electric and electronic equipment are
required to be separated from normal waste
for disposal (Reference WEEE Directive,
2002/96/EC).
This symbol on an instrument means caution,
risk of danger. You should refer to the oper-
ating instructions located in the user doc-
umentation in all cases where the symbol is
marked on the instrument.
This symbol indicates the time period during
which no hazardous or toxic substance ele-
ments are expected to leak or deteriorate
during normal use. Forty years is the
expected useful life of the product.
This symbol indicates the instrument is sen-
sitive to electrostatic discharge (ESD). ESD
can damage the highly sensitive components
in your instrument. ESD damage is most
likely to occur as the module is being
installed or when cables are connected or dis-
connected. Protect the circuits from ESD dam-
age by wearing a grounding strap that
provides a high resistance path to ground.
Alternatively, ground yourself to discharge
any built-up static charge by touching the
outer shell of any grounded instrument chas-
sis before touching the port connectors.
CLEANING PRECAUTIONS:
To prevent electrical shock, disconnect
the Agilent Technologies instrument from
mains before cleaning. Use a dry cloth or
one slightly dampened with water to
clean the external case parts. Do not
attempt to clean internally. To clean the
connectors, use alcohol in a well-ven-
tilated area. Allow all residual alcohol
moisture to evaporate, and the fumes to
dissipate prior to energizing the
instrument.
Advertisement
Table of Contents
