Table of Contents
Advertisement
High-Level Diagnostic Tools, Processes and References
High-Level Diagnostic Tools, Processes and References
This section provides high-level tools, processes, and references to help you diagnose problems with your module.
Before attempting to diagnose the Agilent M9302A, make sure you have followed the necessary
startup instructions (see
In this section:
Specifications
(page 16)
l
Self Test
(page 16)
l
Front Panel LEDs
l
Block Diagram
(page 18)
l
Operational Check
l
Specifications
The Data Sheet for the M9302A is included on the Agilent M9392A VSA Software and Product Information CD
that came with your module.This document contains specification information. To find the latest update, go to
http://cp.literature.agilent.com/litweb/pdf/5990-6053EN.pdf.
Self Test
The Soft Front Panel (SFP) provides a self test utility to verify power and perform an internal check of module
sub-components. To access the SFP, go to Start > All Programs > Agilent > M9392 > M9302 SFP. To conduct
the self test from the SFP, go to Utility > Self Test..., and then click the Run Self Test button.
Hardware Status Display
The Soft Front Panel (SFP) displays the module's hardware status. To access the SFP, go to Start > All Programs
> Agilent > M9392 > M9302 SFP. The status is automatically updated once every five seconds. The status can
also be manually updated by a refresh (View > Refresh).
16
"Getting
Started" on page 1).
(page 17)
(page 18)
Agilent M9302A PXI Local Oscillator Service Guide
Advertisement
Table of Contents
