Step 1: Unpack And Inspect The Module; Esd; Step 2: Install The Software; System Requirements - Agilent Technologies M9302A Service Manual

Pxi local oscillator 3 ghz to 10 ghz
Hide thumbs Also See for M9302A:
Table of Contents

Advertisement

Getting Started

Step 1: Unpack and Inspect the Module

The module is shipped in materials which prevent damage from static. The module should only be
removed from the packaging in an anti-static area ensuring that correct anti-static precautions are
taken. Store all modules in anti-static envelopes when not in use.

ESD

Step 2: Install the Software

System Requirements

Topic
Windows
Windows 7 (32 bit and 64 bit);
Operating system
Windows
1 GHz 32-bit (x86), 1 GHz 64-bit (x64), no support for Ita-
Processor speed
nium64
Available mem-
1 GB minimum
ory
1.5 GB available hard disk space, includes:
Available disk
1 GB available for Microsoft .NET Framework 3.5 SP1
l
space
100 MB for Agilent IO Libraries Suite
l
Support for DirectX 9 graphics with 128 MB graphics mem-
Video
ory recommended (Super VGA graphics is supported)
Microsoft ® Internet Explorer 7.0 or greater
Browser
1 This is the required disk space for installation. Typically, less disk space is required for operation than is required for installation.
2 .NET Framework Runtime Components are installed by default with Windows 7 and Vista. Therefore, you may not need this amount of disk
space.
10
®
7 and Vista Requirements
®
Vista, SP1 and SP2 (32-bit and 64-bit)
Electrostatic discharge (ESD) can damage or destroy elec-
tronic components. Use a static-safe work station to per-
form all work on electronic assemblies. The figure (left)
shows a static-safe work station using two types of ESD pro-
tection: conductive table-mat and wrist-strap combination,
and conductive floor-mat and heel-strap combination. Both
types, when used together, provide a significant level of
ESD protection. Of the two, only the table-mat and wrist-
strap combination provides adequate ESD protection when
used alone. To ensure user safety, the static-safe acces-
sories must provide at least 1 MΩ of isolation from ground.
DO NOT use these techniques for a static-
safe work station when working on circuitry with a volt-
age potential greater than 500 volts.
Windows
Window
600 MHz or higher required
800 MHz recommended
256 MB minimum (1 GB or greater rec-
ommended)
2
Super VGA (800x600) 256 colors or
more
Microsoft ® Internet Explorer 6.0 or
greater
Agilent M9302A PXI Local Oscillator Service Guide
®
XP Requirements
®
XP, Service Pack 3

Advertisement

Table of Contents
loading

Table of Contents