The cylinders shall be placed one on each side of the beam center line.
Note
n
When jacking beams are intended to be used on the lift, the minimum distance
between the tracks should be 43.3 inches and the tracks should be not more than
0.4 inches out of parallel.
3.3
Lift system
This hydraulic vehicle lift is provided with a hydraulic unit. The hydraulic unit drives
four cylinders which are mounted in the lifting devices.
Figure 3.3 Main components vehicle lift
Operation & maintenance instructions (Version H)
28
Lift system
1. Lifting device
2. Track
3. Cylinder
4. Ramp
5. Control box
SKY-200/250