Required Materials And Special Tools; Parts; Foundation - stertil-KONI SKY-200 Installation, Operation And Maintenance Instructions

Hydraulic vehicle lift
Table of Contents

Advertisement

4

4.1.1 Required materials and special tools

Table 4.1 Materials and special tools
Item
Set chemical anchor bolts included shims
Set chemical anchor bolts include shims for areas with higher risk level
for earthquakes

4.1.2 Parts

Figure 4.1 Main parts vehicle lift
4.2

Foundation

The vehicle lift can be installed on any suitable concrete floor.
If installing onto a supported reinforced concrete floor above an area or above
another storey, an assessment must be made by an architect. The maximum
pressure exerted by each leg is 2x12,000 lbf (SKY-250) 2x10,000 lbf (SKY-200).
Operation & maintenance instructions (Version H)
Assembly
31
Stertil number
41300990
41300992
1. Lifting device
2. Track
3. Control box
4. Hydraulic cylinder
5. Ramp
6. Ramp
7. Stop plate
SKY-200/250

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sky-250

Table of Contents