Manufacturers Instructions To The Lift Owner/Employer - stertil-KONI SKY-200 Installation, Operation And Maintenance Instructions

2
• This vehicle lift should only be used for lifting of
vehicles and not for other applications. The
positioning of the lifting system must be done in a
way that a safe working area will be obtained,
thereby creating escape paths for emergency
situations (leave passageways of at least 24").
• During welding onto a vehicle on the lift, take care
of adequate earthing of the vehicle to prevent
damage to the hydraulic cylinder, cables etc.
FOR YOUR AND OTHER PEOPLES SAFETY: SAVE
THESE INSTRUCTIONS.
Warning
w
All accessories supplied with this lift are to be used on this lift only.
Accessories from other lifts are not acceptable and could result in injury to the
user.
2.4 Manufacturers instructions to the lift
owner/employer
The owner/employer shall:
• Ensure that lift operators are qualified and that they are trained in the safe
use and operation of the lift using the manufacturers operating
instructions; ALI/SM 01-1, ALI Lifting it Right safety manual; SAE J2184,
Vehicle lift points for Service Garage Lifting; ALI/ST-90, ALI Safety Tips
card; ANSI/ALI ALIS, Safety Requirements for installation and service of
Automotive Lifts; ANSI/ALI ALOIM-2008, American National Standard for
Automotive Lifts-Safety Requirements for Operation Inspection and
Maintenance; ALI/WL Series, ALI Uniform Warning Label Decals/Placards.
• Establish procedures to periodically inspect the lift in accordance with the
lift manufacturers instructions; ANSI/ALI ALOIM-2008, American National
Standard for Automotive Lifts-Safety Requirements for Inspection and
Maintenance; and the employer shall ensure that lift inspectors are
qualified and that they are adequately trained in the inspection of the lift.
Operation & maintenance instructions (Version H)
Safety
19 SKY-200/250