A Figures And Diagrams - stertil-KONI SKY-200 Installation, Operation And Maintenance Instructions

Hydraulic vehicle lift
Table of Contents

Advertisement

A
Figures and diagrams
The following sections give an overview of the main assemblies and their components:
A.1 'Summary vehicle lift' on page 91
A.2 'Lifting assembly' on page 92
A.3 'Bellows' on page 100
A.4 'Unlocking assembly' on page 102
A.5 'Stop plate and cable chain' on page 104
A.6 'Drive-on ramps' on page 106
A.7 'Cable duct (surface mounted version)' on page 108
A.8 'Cable duct (flush mounted version)' on page 109
A.9 'Console' on page 110
A.10 'Control box' on page 114
A.11 'Hydraulic components' on page 117
A.12 'Hydraulic cylinder' on page 125
A.13 'Label locations' on page 127
A.14 'Dimensional drawing' on page 129
Note
n
For some assemblies two lists are present, representing the assemblies of the first
or the second generation.
First generation assemblies:
Flush Mounted type
TZ184415
TZ183917
TZ173891
TZ173892
TZ184051
TZ183753
TZ179014
TZ166649
TZ163323
TZ173258
All other serial numbers are second generation assemblies.
Operation & maintenance instructions (Version H)
Surface Mounted type
TZ184852
TZ189185
TZ184052
TZ185863
TZ183918
TZ174309
TZ176307
TZ175482
TZ175483
TZ175295
TZ175296
TZ187196
TZ184277
TZ176612
TZ187896
90
A
SKY-200/250

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sky-250

Table of Contents