9
Options
9.1
Lighting
The lighting is operated by means of the switch with the light symbol. The lighting is
automaticly switched on when raising, and switched off during lowering when the
tracks are lower than 20" (500 mm).
Note
n
For faults, refer to the fault diagnosis (see
The lighting option consists of:
• a number of LED-engines with light tubes (1),
• connection cables (from LED-engine to LED-engine) (2),
• extension cables (if required) (3),
• a transformer or a switching power supply (in stead of the transformer) (4),
• power supply cable (transformer to lift) (5),
• a number of cables for the connections inside the control box (6),
• a relay socket and a relay (7).
Operation & maintenance instructions (Version H)
8.5 'Fault diagnosis' on page
79
9
73).
SKY-200/250