9.2
Divisible drive-on ramps
The parts (1) and (2) are the standard delevery. Optionally extra separate parts (3)
can be delivered of 20" (500 mm) (art.nr. 41300460).
Figure 9.6 Divisible drive-on ramps
Follow the next described procedure to assemble the divisible drive-on ramps:
1.
First mount the separate strip (4) at the concrete at a distance of 12" (300 mm) from
the footplate.
2.
Fasten part (1) using bolts and washers (6 and 7).
3.
Now place the parts (3) using the pin and hole connection.
4.
Use part (2) to determine the correct position of the separate strip (4).
5.
Fasten this strip using the anchors (5).
6.
Now mount part (2) using bolts and washers (6 and 7).
7.
If required, parts (3) can also be fastened with anchors.
Operation & maintenance instructions (Version H)
84
Divisible drive-on ramps
SKY-200/250