Preface - stertil-KONI SKY-200 Installation, Operation And Maintenance Instructions

Hydraulic vehicle lift
Table of Contents

Advertisement

Preface

Prior to the operation of your Stertil Koni vehicle lift, make sure that you read the
instructions thoroughly. These instructions are found in this manual. Please note that
your warranty can be voided if you do not read the manual and understand its
contents
If you have any questions concerning operation, safety or application of your vehicle
lift, please contact Stertil Koni USA at the following toll free number:
800 336 6637 or call 410 643 9001.
The address for Stertil Koni USA Inc. is 200 Log Canoe Circle, Stevensville,
Maryland 21666.
The operator shall have certain qualifications before he/she can safely operate a
Stertil Koni vehicle lift and these include ability in written or oral communications as
demonstrated by either a high school diploma or certificate of equivalency, aptitude
test or job experience. He/she must also have the ability to understand the
mathematical, mechanical and electrical principles of automotive lifts as
demonstrated by one of, or a combination of aptitude test, training program,
technical vocational school or job experience.
The owner/employer of the Stertil Koni vehicle lift must ensure that the operator of
the vehicle lift must be instructed and trained in the safe use and operation of the lift
using the manufacturer provided instructions and warning labels and the Automotive
Lift Institute Publications, "Lifting It Right" and "Safety Tips".
The lift that has been delivered to you contains the supply of operating instructions,
general safety information, safety tips and warning labels on the control post. As an
owner, or employer, it is requested that you display these materials in a conspicuous
location in the lift operating area.
The owner or employer shall appropriately document operator training by
completing an operator-training log, which shall be part of the management
documentation.
The operator shall operate the automotive lift only after being properly instructed or
trained in accordance with manufacturer supplied instructions found in the this
manual.
The operator shall use all applicable safety features provided on the automotive lift
and operate the lift in accordance with the instructions provided by Stertil Koni.
The lift operator or employer shall take all appropriate steps to follow the
recommended inspection procedures of the lift manufacturer but in no event shall
the lift operator fail to inspect or take notice of the following features on a daily
basis:
1.
Accessibility and readability of the operating procedures, safety tips and generic
safety material.
2.
Accessibility and readability of safety warning labels.
3.
Readability of the rated load capacity of the lift.
Operation & maintenance instructions (Version H)
9
SKY-200/250

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sky-250

Table of Contents